Design and Simulation of a Predictive Maintenance Model for a Power Transformer: A Case Study of a Transmission Substation in Nigeria

Authors

  • Gerard Nonso Obiora Department of Electrical/Electronics & Telecommunication Engineering, Bells University of Technology, Ota, Ogun State, P.M.B. 1015, Nigeria. https://orcid.org/0009-0006-4171-3578
  • Olusegun Julius Adebowale Department of Electrical/Electronics & Telecommunication Engineering, Bells University of Technology, Ota, Ogun State, P.M.B. 1015, Nigeria. https://orcid.org/0009-0009-6729-0931

DOI:

https://doi.org/10.56532/mjsat.v6i2.679

Keywords:

Power Transformers, Gradient boosting Algorithm, Dissolved Gas Analysis, Predictive Maintenance, Transmission System

Abstract

The most crucial component of a high-voltage transmission system are power transformers, whose unplanned failure can cause major operational interruptions, monetary losses, and widespread power outages. A predictive maintenance framework and simulation for a 300-MVA power transformer at a 330/132 kV transmission substation in Lagos State, Nigeria, is presented in this study. Gradient Boosting algorithm (GBA) was utilized to analyze the transformer's historical data in order to predict potential transformer faults. Important data were collected and pre-processed, including Dissolved Gas Analysis (DGA), load profile, insulation resistance, top-oil and ambient temperature. The GB model was then trained and tested using the dataset. The obtained results indicates that the most significant indicators of transformer malfunctions were the presence of acetylene and hydrogen compounds. The model achieved 93% accuracy, with recall, Area Under the Curve (AUC), and average precision of 88%, 91% and 88.4% respectively. This suggests that the model has an effective fault prediction capability. Because it helps with problem identification, the study has demonstrated that GB can be utilized to increase the reliability of power transformer operations. Utilities seeking to minimize transformer downtime will find the model useful.

References

S. Khan, K. Rahman, M. Tariq, S. Hameed, B. Alamri, and T. S. Babu, ‘‘Solid-state transformers: fundamentals, topologies, applications, and future challenges,’’ Sustainability, vol. 14, no. 1, p. 319, 2022. doi: https://doi.org/10.3390/su14010319

V. A. Thiviyanathan, P. J. Ker, Y. S. Leong, F. Abdullah, A. Ismail, and M. Z. Jamaludin, ‘‘Power transformer insulation system: a review on the reactions, fault detection,’’ challenges and future prospects. Alexandria Engineering Journal, vol. 61, no. 10, pp. 7697-7713, 2022. doi: https://doi.org/10.1016/j.aej.2022.01.026

M. Molęda, B. Małysiak-Mrozek, W. Ding, V. Sunderam, and D. Mrozek, ‘‘From corrective to predictive maintenance-a review of maintenance approaches for the power industry,’’ Sensors, vol. 23, no. 13, p. 5970, 2023. doi: https://doi.org/10.3390/s23135970

Isaac, J. Ibanga, Musa, Ladan, and I. M. Dawasa, ‘‘Power distribution transformer maintenance skills required by electrical engineering technology students of polytechnics in north-east Nigeria,’’ Online Journal for TVET Practitioners, vol. 9, no. 2, pp. 49-59, 2024. doi: https://doi.org/10.30880/ojtp.2024.09.02.004

H. Mbembati, K. Ibwe, and B. Maiseli, ‘‘Maintenance scheduling algorithm for transformers in Tanzania electrical secondary distribution networks,’’ Tanzania Journal of Science, vol. 49, no. 1, pp. 167-182, 2023. doi: https://doi.org/10.4314/tjs.v49i1.15

V. Vita, G. Fotis, V. Chobanov, C. Pavlatos, and V. Mladenov, ‘‘Predictive maintenance for distribution system operators in increasing transformers’ reliability,’’ Electronics, vol. 12, no. 6, p. 1356, 2023. doi: https://doi.org/10.3390/electronics12061356

I. Rojek, D. Mikolajewski, E. Dostatni, A. Piszcz, and K. Galas, ‘‘ML-based maintenance and control process analysis, simulation, and automation—a review,’’ Applied Sciences, vol. 14, no. 19, p. 8774, 2024. doi: https://doi.org/10.3390/app14198774

A. F. Nneze, W. Ezeodili, and N. U. Lilian, ‘‘Effect of power supply on the socio-economic development of south east, Nigeria,’’ Journal of Policy and Development Studies, vol. 16, no. 2, pp. 13-34, 2024. doi: https://doi.org/10.4314/jpds.v16i2.2

R. O. Okeke, A. I. Ibokette, O. M. Ijiga, L. A. Enyejo, G. I. Ebiega, and O. M. Olumubo, ‘‘The reliability assessment of power transformers,’’ Engineering Science & Technology Journal, vol. 5, no. 4, pp. 1149-1172, 2024. doi: https://doi.org/10.51594/estj.v5i4.981

S. O. Oyedepo, and R. O. Fagbenle, ‘‘A study of implementation of preventive maintenance programme in Nigeria power industry-Egbin thermal power plant, case study,’’ Energy and Power Engineering, vol. 3, no. 3, pp. 207-220, 2011. doi: http://dx.doi.org/10.4236/epe.2011.33027

M. Nuruzzaman, G. Q. Limon, A. R. Chowdhury, and M. A. M. Khan,‘‘Predictive maintenance in power transformers: a systematic review of AI and IoT applications,’’ ASRC Procedia: Global Perspectives in Science and Scholarship, vol. 1, no. 01, pp. 34-47, 2025. url: https://global.asrcconference.com/index.php/asrc/article/view/3

A. Ucar, M. Karakose, and N. Kirimca, ‘‘Artificial intelligence for predictive maintenance applications: key components, trustworthiness, and future trends,’’ Applied Sciences, vol. 14, no, 2, p. 898, 2024. doi: https://doi.org/10.3390/app14020898

E. D. Fylladitakis, ‘‘Fault identification and predictive maintenance techniques for high-voltage equipment: A review and recent advances. Journal of Power and Energy Engineering, vol. 13, no. 7, 2025. doi: https://doi.org/10.4236/jpee.2025.137001

R. Zemouri, ‘‘Power transformer prognostics and health management using machine learning: a review and future directions,’’ Machines, vol. 13, no. 2, p. 125, 2025. doi: https://doi.org/10.3390/machines13020125

E. Tamakloe, B. Kommey, J. J. Kponyo, E. T. Tchao, A. S. Agbemenu, and G. S. Klogo, ‘‘Predictive AI maintenance of distribution oil-immersed transformer via multimodal data fusion: a new dynamic multiscale attention CNN-LSTM anomaly detection model for industrial energy management,’’ IET Electric Power Applications, vol. 19. no. 1, 2025. doi: https://doi.org/10.1049/elp2.70011

A. U. Emmanuel, ‘‘Transformer predictive maintenance using artificial intelligence,’’ Uniport Journal of Engineering and Scientific Research, vol. 8, no. 1, pp. 190-198, 2023. url: https://ujesr.org/images/vol8/Article-21.pdf

L. He, L. Li, M. Li, Z. Li, and X. Wang, ‘‘A deep learning approach to the transformer life prediction considering diverse aging factors,’’ Frontiers in Energy Research, vol. 10, 2022. doi: https://doi.org/10.3389/fenrg.2022.930093

R. D. Luca, A. Ferraro, A. Galli, M. Gallo, V. Moscato, and G. Sperli, ‘‘A deep attention based approach for predictive maintenance applications in IoT scenarios,’’ Journal of Manufacturing Technology Management, vol. 34, no. 4, pp. 535-556, 2023. doi: https://doi.org/10.1108/JMTM-02-2022-0093

X. Ma, Y. Luo, J. Shi, and H. Xiong, ‘‘Acoustic emission based fault detection of substation power transformer,’’ Applied Sciences, vol. 12, no. 5, p. 2759, 2022. doi: http://dx.doi.org/10.3390/app12052759

A. Shaikh, P. Nannewar, D. Mangate, R. Gajapure, S. Tirpude, and A. Ikhar, ‘‘IOT based transformer monitoring system,’’ International Journal of Scientific Research in Science, Engineering and Technology, vol. 7, no. 3, pp. 115-119, 2020. doi: https://doi.org/10.32628/IJSRSET207342

K. Sathupadi, S. Achar, S. V. Bhaskaran, N. Faruqui, M. A. Wadud, and J. Uddin, ‘‘Edge-cloud synergy for AI-enhanced sensor network data: a real-time predictive maintenance framework,’’ Sensors, vol. 24, no. 24, p. 7918, 2024. doi: https://doi.org/10.3390/s24247918

E. Baker, S. V. Nese, and E. Dursun, ‘‘Hybrid condition monitoring system for power transformer fault diagnosis,’’ Energies, vol. 16, no. 3, p. 1151, 2023. doi: https://doi.org/10.3390/en16031151

E. T. Mharakurwa, and D. W. Gicheru, ‘‘Transformer hot spot temperature estimation through adaptive neuro fuzzy inference system approach,’’ Heliyon, vol. 10, no. 4, 2024. doi: https://doi.org/10.1016/j.heliyon.2024.e26338

G. N. Obiora, Y. R. Amoo, G. O. Igbinosa, C. B. Fiemobebefa, and O. A. Bamido, ‘‘Transformer failure rates and reliability analysis,’’ Nigerian Journal of Applied Science and Innovative Technology, vol. 1, no. 1, pp. 35-45, 2025. url: https://nijasit.bellsuniversity.edu.ng/article/4

M. Aslam, I. U. Haq, M. S. Rehan, A. Basit, M. Arif, M. I. Khan, M. Sadiq, and M. N. Arbab, ‘‘Dynamic thermal model for power transformers,’’ IEEE Access, vol. 9, pp. 71461–71469, 2021. doi: https://doi.org/10.1109/ACCESS.2021.3078759

T. Wang, Q. Li, J. Yang, T. Xie, P. Wu, and J. Liang, ‘‘Transformer fault diagnosis method based on incomplete data and TPE-XGBoost,’’ Applied Sciences, vol. 13, no. 13, p. 7539, 2023. doi: https://doi.org/10.3390/app13137539

Y. Maanani, C. Pham, Q. Wang, K. K. Nguyen, and K. Al-Haddad, ‘‘XGBoost for multi-fault diagnosis and prediction in permanent magnet synchronous machines,’’ Electronics, vol. 15, no. 18, p. 1759, 2026. doi: https://doi.org/10.3390/electronics15081759

A. R. Bessa, J. F. Fardin, P. M. Ciarelli, and L. F. Encarnacao, ‘‘Conventional dissolved gases analysis in power transformers: Review,’’ energies, vol. 16, p. 7219, 2023. doi: https://doi.org/10.3390/en16217219

L. W. Rizkallah, ‘‘Enhancing the performance of gradient boosting trees on regression problems,’’ Journal of Big Data, vol. 12, no. 35, 2025. doi: https://doi.org/10.1186/s40537-025-01071-3

A. Natekin, and A. Knoll, ‘‘Gradient boosting machines, a tutorial,’’ frontiers in NEUROROBOTICS, vol. 7, pp. 1-21, 2013. doi: https://doi.org/10.3389/fnbot.2013.00021

J. H. Friedman, ‘‘Greedy function approximation: A gradient boosting machine,’’ The Annals of Statistics, vol. 29, no. 5, pp. 1189-1232, 2001. doi: https://doi.org/10.1214/aos/1013203451

O. A. Adeyeye, A. O. Amole, and O. A. Bamido, ‘‘Analysis of recurrent neural network and long-short term memory based fault detection systems for microgrid applications,’’ OAUSTECH Journal of Engineering and Intelligent Technology, vol. 1, no. 1, 2025. doi: http://dx.doi.org/10.36108/ojeit/5202.10.0110

Downloads

Published

2026-06-24

Issue

Section

Articles

How to Cite

[1]
“Design and Simulation of a Predictive Maintenance Model for a Power Transformer: A Case Study of a Transmission Substation in Nigeria”, Malaysian J. Sci. Adv. Tech., vol. 6, no. 2, pp. 228–240, Jun. 2026, doi: 10.56532/mjsat.v6i2.679.