Transformative Applications of IoT in Diverse Industries: A Mini Review

Authors

  • Krishna Sannasy Rao School of Engineering and Computing, MILA University, No 1, MIU Boulevard, Putra Nilai, Nilai 71800, Malaysia https://orcid.org/0009-0000-3118-3397
  • Chong Peng Lean School of Engineering and Computing, MILA University, No 1, MIU Boulevard, Putra Nilai, Nilai 71800, Malaysia https://orcid.org/0000-0003-3277-9533
  • Kong Feng Yuan Faculty of Engineering and Technology, Multimedia University, Jalan Ayer Keroh Lama, Melaka 75450, Malaysia
  • Ng Poh Kiat Faculty of Engineering and Technology, Multimedia University, Jalan Ayer Keroh Lama, Melaka 75450, Malaysia https://orcid.org/0000-0001-7995-8251
  • Chen Li Hainan Yuanli Artificial intelligence Technology Co.,Ltd., Room 207, Building B, No.3 Haitao Avenue, Jiangdong New District, Haikou City,vHainan Province, China
  • Mohammed Reyasudin Basir Khan Tun Razak Graduate School, Universiti Tun Abdul Razak (UNIRAZAK), Wisma UNIRAZAK, 195A, Jln Tun Razak, Hampshire Park, Kuala Lumpur, 50450, Malaysia https://orcid.org/0000-0002-9964-6826
  • Daniel Ismail Faculty of IT and Technology, International University of Applied Sciences Bad Honnef, 53604 Bad Honnef, Germany https://orcid.org/0000-0002-0887-3856

DOI:

https://doi.org/10.56532/mjsat.v4i2.292

Keywords:

Healthcare, Smart-City, Smart-Farming, Smart Manufacturing, Smart Education

Abstract

By integrating physical objects and facilitating data-driven decision-making, the Internet of Things (IoT) is transforming several sectors. Through the provision of individualised treatment plans, real-time health data analysis, and remote patient monitoring, it is vital to the modernization of healthcare systems. IoT technologies are essential to the development of smart cities, resource allocation optimisation, public safety improvement, and traffic congestion reduction. IoT-driven smart farming automates machinery, optimises irrigation, and monitors crop conditions. As IoT makes it possible to create smart grids, save energy waste, and increase grid dependability, the energy landscape is changing. IoT makes it easier to apply Industry 4.0 ideas in the manufacturing sector, converting conventional factories into networked, intelligent systems. Reducing operating costs and increasing productivity are the outcomes of implementing IoT-enabled sensors, robots, and data analytics to improve supply chain management, predictive maintenance, and production efficiency. Innovation, sustainability, and efficiency are becoming more and more possible as a result of the Internet of Things' integration across many industries. This review also showcases the relevant prospects of IoT applications in the fields mentioned.

References

P. L. Chong, Y. Y. Than, S. Ganesan, and P. Ravi, “An Overview of IoT Based Smart Home Surveillance and Control System: Challenges and Prospects,” Malaysian Journal of Science and Advanced Technology, pp. 54–66, 2022, doi: https://doi.org/10.56532/mjsat.v2iS1.121

Peng Lean Chong, S. Ganesan, Yin Ying Than, and P. Ravi, “Designing an Autonomous Triggering Control System via Motion Detection for IoT Based Smart Home Surveillance CCTV Camera,” Malaysian Journal of Science and Advanced Technology, pp. 80–88, Mar. 2023, doi: https://doi.org/10.56532/mjsat.v2is1.120

Á. Verdejo-Espinosa, J. Ruiz, F. Mata, & M. Espinilla, "Application of iot in healthcare: keys to implementation of the sustainable development goals", Sensors, vol. 21, no. 7, p. 2330, 2021. https://doi.org/10.3390/s21072330

P. Mathew, A. Pillai, & V. Palade, "Applications of iot in healthcare", Cognitive Computing for Big Data Systems Over IoT, p. 263-288, 2017. https://doi.org/10.1007/978-3-319-70688-7_11

R. Kodali, G. Swamy, & L. Boppana, "an implementation of iot for healthcare",, 2015. https://doi.org/10.1109/raics.2015.7488451

M. A. Azzawi, R. Hassan, and K. A. Abu Bakar, A review on internet of things (IOT) in healthcare - researchgate (accessed Dec. 27, 2023)

M. Khan, "Challenges facing the application of iot in medicine and healthcare", International Journal of Computations, Information and Manufacturing (IJCIM), vol. 1, no. 1, 2021. https://doi.org/10.54489/ijcim.v1i1.32

T. Trayush, R. Bathla, S. Saini, & V. Shukla, "Iot in healthcare: challenges, benefits, applications, and opportunities", 2021 International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE), 2021. https://doi.org/10.1109/icacite51222.2021.9404583

Y. Qian, D. Wu, W. Bao, and P. Lorenz, The Internet of Things for Smart Cities: Technologies and Applications, https://ieeexplore.ieee.org/Xplore/home.jsp (accessed Dec. 28, 2023).

Y. Mehmood, F. Ahmad, I. Yaqoob, A. Adnane, M. Imran, & S. Guizani, "Internet-of-things-based smart cities: recent advances and challenges", IEEE Communications Magazine, vol. 55, no. 9, p. 16-24, 2017. https://doi.org/10.1109/mcom.2017.1600514

A. Zanella, N. Bui, A. Castellani, L. Vangelista, & M. Zorzi, "Internet of things for smart cities", IEEE Internet of Things Journal, vol. 1, no. 1, p. 22-32, 2014. https://doi.org/10.1109/jiot.2014.2306328

T. Gea, J. Paradells, M. Lamarca, & D. Roldán, "Smart cities as an application of internet of things: experiences and lessons learnt in barcelona", 2013 Seventh International Conference on Innovative Mobile and Internet Services in Ubiquitous Computing, 2013. https://doi.org/10.1109/imis.2013.158

M. González-Zamar, E. Abad-Segura, E. Vázquez‐Cano, & E. López-Meneses, "Iot technology applications-based smart cities: research analysis", Electronics, vol. 9, no. 8, p. 1246, 2020. https://doi.org/10.3390/electronics9081246

C. Peng Lean and K. Feng Yuan, “System For Providing Flood And Rain Alert,” Dec. 28, 2022 Accessed: Feb. 25, 2024. [Online]. Available: https://iponlineext.myipo.gov.my/SPHI/Extra/IP/Mutual/Browse.aspx?sid=637550536653982775

R. Dagar, S. Som, and S. K. Khatri, Smart Farming – IoT in Agriculture, https://ieeexplore.ieee.org/abstract/document/8597264 (accessed Dec. 28, 2023).

A. Kamilaris, F. Gao, F. Prenafeta-Boldú, & M. Ali, "Agri-iot: a semantic framework for internet of things-enabled smart farming applications", 2016 IEEE 3rd World Forum on Internet of Things (WF-IoT), 2016. https://doi.org/10.1109/wf-iot.2016.7845467

P. Maduranga and R. Abeysekera, Machine Learning Applications in IOT Based Agriculture and Smart Farming: A Review (accessed Dec. 28, 2023).

J. Muangprathub et al., “IOT and Agriculture Data Analysis for Smart Farm,” Computers and Electronics in Agriculture,https://www.sciencedirect.com/science/article/abs/pii/S0168169918308913 (accessed Dec. 28, 2023)

C. Peng Lean and A. Kumar Singh, “Characterisation Of Living Plant Energy Harvesting For Wireless Sensor,” Characterisation Of Living Plant Energy Harvesting For Wireless Sensor, Feb. 2024, Accessed: Feb. 25, 2024. [Online]. Available: https://shdl.mmu.edu.my/id/eprint/7735

P. L. Chong, A. K. Singh, and F. Y. Kyong, “Renewable Energy from Living Plants to Power IoT Sensor for Remote Sensing,” ADBU Journal of Engineering Technology, vol. 11, no. 1, May 2022, Accessed: Feb. 09, 2024. [Online]. Available: https://journals.dbuniversity.ac.in/ojs/index.php/AJET/article/view/3613

P. L. Chong, A. K. Singh, and S. L. Kok, “Potential application of Aloe Vera-derived plant-based cell in powering wireless device for remote sensor activation,” PLoS ONE, vol. 14, no. 12, Dec. 2019, doi: https://doi.org/10.1371/journal.pone.0227153

P. L. Chong, A. K. Singh, and S. L. Kok, “Characterization of Aloe Barbadensis Miller leaves as a potential electrical energy source with optimum experimental setup conditions,” PLOS ONE, vol. 14, no. 6, p. e0218758, Jun. 2019, doi: https://doi.org/10.1371/journal.pone.0218758

Mohammed Adel Al-badani, Peng Lean Chong, and Heng Siong Lim, “A mini review of the effect of modified carbon paper, carbon felt, and carbon cloth electrodes on the performance of microbial fuel cell,” International Journal of Green Energy, vol. 21, no. 1, pp. 170–186, Mar. 2023, doi: https://doi.org/10.1080/15435075.2023.2194979

Mohammed Adel Al-badani, Peng Lean Chong, and Heng Siong Lim, “Enhancing microbial fuel cell performance with carbon powder electrode modifications for low-power sensors modules,” International Journal of Renewable Energy Development, vol. 13, no. 1, pp. 80–87, Nov. 2023, doi: https://doi.org/10.14710/ijred.2024.58977

M. A. M. Qasem Albadani, L. Heng Siong, and C. Peng Lean, “Investigation of Bio-Energy in Powering IoT Sensors,” Feb. 2024, Accessed: Feb. 25, 2024. [Online]. Available: https://shdl.mmu.edu.my/11624/

Younes Zahraoui, Ibrahim Alhamrouni, Saad Mekhilef, M Reyasudin Basir Khan, Barry P Hayes, Mahrous Ahmed. “A novel approach for sizing battery storage system for enhancing resilience ability of a microgrid”. International Transactions on Electrical Energy Systems, Wiley. Sep 2021 https://doi.org/10.1002/2050-7038.13142

M Reyasudin Basir Khan, Razali Jidin, Jagadeesh Pasupuleti: Energy audit data for a resort island in the South China Sea. Data in Brief 12/2015; 6. DOI:10.1016/j.dib.2015.12.033

Zahraoui, Younes, Ibrahim Alhamrouni, M. Reyasudin Basir Khan, Saad Mekhilef, Barry P. Hayes, Muhyaddin Rawa, and Mahrous Ahmed. "Self‐healing strategy to enhance microgrid resilience during faults occurrence." International Transactions on Electrical Energy Systems 31, no. 12 (2021): e13232. https://doi.org/10.1002/2050-7038.13232

Dilini Almeida, Jagadeesh Pasupuleti, Shangari K. Raveendran and M. Reyasudin Basir Khan. Performance Evaluation of Solar PV Inverter Controls for Overvoltage Mitigation in MV Distribution Networks. Electronics. MDPI, June 2021. https://doi.org/10.3390/electronics10121456

H. Shahinzadeh, J. Moradi, G. B. Gharehpetian, H. Nafisi, and M. Abedi, “IOT architecture for smart grids,” 2019 International Conference on Protection and Automation of Power System (IPAPS), 2019. doi:10.1109/ipaps.2019.8641944

A. Arya et. al., “Energy saving in distribution system using internet of things in smart grid environment.,” International Journal of Computing and Digital Systems, vol. 8, no. 2, pp. 158–165, 2019. doi:10.12785/ijcds/080207

Y. Kabalcı, E. Kabalcı, S. Padmanaban, J. Holm‐Nielsen, & F. Blaabjerg, "Internet of things applications as energy internet in smart grids and smart environments", Electronics, vol. 8, no. 9, p. 972, 2019. https://doi.org/10.3390/electronics8090972

N. Renugadevi, S. Saravanan, & C. Sudha, "Iot based smart energy grid for sustainable cites", Materials Today: Proceedings, vol. 81, p. 98-104, 2023. https://doi.org/10.1016/j.matpr.2021.02.270

S. M. Abir, A. Anwar, J. Choi, and A. S. Kayes, “IOT-enabled Smart Energy Grid: Applications and challenges,” IEEE Access, vol. 9, pp. 50961–50981, 2021. doi:10.1109/access.2021.3067331

Q. Yang, "Internet of things application in smart grid: a brief overview of challenges, opportunities, and future trends", Smart Power Distribution Systems, p. 267-283, 2019. https://doi.org/10.1016/b978-0-12-812154-2.00013-4

H. Yang, S. Kumara, S. Bukkapatnam, & F. Tsung, "The internet of things for smart manufacturing: a review", IISE Transactions, vol. 51, no. 11, p. 1190-1216, 2019. https://doi.org/10.1080/24725854.2018.1555383

P. K. Ng, P. L. Chong, J. A. Yeow, Y. J. Ng, and R. Jeyakumar Nathan, “Ergonomic Work from Home Recommendations Using TRIZ,” in Human Factors in Engineering Manufacturing Systems, Automation, and Interactions, Boca Raton: Taylor & Francis, 2023, pp. 65–82. Accessed: Feb. 25, 2024. [Online]. Available: https://www.taylorfrancis.com/chapters/edit/10.1201/9781003383444-4/ergonomic-work-home-recommendations-using-triz-poh-kiat-ng-peng-lean-chong-jian-ai-yeow-yu-jin-ng-robert-jeyakumar-nathan?context=ubx&refId=f08c3c55-81f5-4d04-a5ad-447a485f1096

N. Santhosh, M. Srinivsan, & K. Ragupathy, "Internet of things (iot) in smart manufacturing", IOP Conference Series: Materials Science and Engineering, vol. 764, no. 1, p. 012025, 2020. https://doi.org/10.1088/1757-899x/764/1/012025

C. Yang, W. Shen, and X. Wang, Applications of internet of things in manufacturing, https://ieeexplore.ieee.org/abstract/document/7566069 (accessed Dec. 29, 2023).

R. Badarinath and V. Prabhu, "Advances in internet of things (iot) in manufacturing", Advances in Production Management Systems. The Path to Intelligent, Collaborative and Sustainable Manufacturing, p. 111-118, 2017. https://doi.org/10.1007/978-3-319-66923-6_13

S. Mittal, M. Khan, D. Romero, & T. Wuest, "Smart manufacturing: characteristics, technologies and enabling factors", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 233, no. 5, p. 1342-1361, 2017. https://doi.org/10.1177/0954405417736547

M. S. Farooq et al., “A survey on the role of industrial IOT in manufacturing for implementation of smart industry,” Sensors, vol. 23, no. 21, p. 8958, 2023. doi:10.3390/s23218958

C. Peng Lean and T. Chun Fui, “An Interactive Whiteboard System,” Feb. 03, 2020 Accessed: Feb. 25, 2024. [Online]. Available: https://iponlineext.myipo.gov.my/SPHI/Extra/IP/Mutual/Browse.aspx?sid=637550536653982775

Peng Lean Chong, D. Ismail, Poh Kiat Ng, Feng Yuan Kong, M. Reyasudin, and Sargunam Thirugnanam, “A TRIZ Approach for Designing a Smart Lighting and Control System for Classrooms Based on Counter Application with Dual PIR Sensors,” Sensors, vol. 24, no. 4, pp. 1177–1177, Feb. 2024, doi: https://doi.org/10.3390/s24041177

Chong Peng Lean, “Blended Learning With E-Learning Tool And Interactive Class Approach,” in Blended Learning Strategies in Technology-supported Classrooms: Best practices from MMU faculties, H. Tan Yeen Ju and N. Mai, Eds., Malaysia: Multimedia University, 2018, pp. 195–213. Accessed: Mar. 16, 2024. [Online]. Available: http://shdl.mmu.edu.my/id/eprint/7735

P. L. Chong, S. Ganesan, P. K. Ng, and F. Y. Kong, “A TRIZ-Adopted Development of a Compact Experimental Board for the Teaching and Learning of Operational Amplifier with Multiple Circuit Configurations,” Sustainability, vol. 14, no. 21, p. 14115, Oct. 2022, doi: https://doi.org/10.3390/su142114115

Downloads

Published

2024-03-31

How to Cite

[1]
Krishna Sannasy Rao, “Transformative Applications of IoT in Diverse Industries: A Mini Review”, Malaysian J. Sci. Adv. Tech., vol. 4, no. 2, pp. 130–140, Mar. 2024.

Issue

Volume 4, Issue 2, June 2024

Section

Articles

License

Copyright (c) 2024 Krishna Sannasy Rao, Chong Peng Lean, Kong Feng Yuan, Ng Poh Kiat, Chen Li, Mohammed Reyasudin Basir Khan, Daniel Ismail

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.